STI – Single-phase control, isolating and safety transformers


Designed and tested according

· IEC/EN 61558-2-2 / 2-4 / 2-6
· VDE 0570-2-2 / 2-4 / 2-6
· UL 5085-2
· CSA 22.2 No. 66

Typical applications

· Control voltage circuits
· Functional low voltage
· Safety low voltage
· Protective separation

For use according to

· IEC/EN 60204-1
· VDE 0113 / VDE 0100 part 410

Basic equipment

· Seperate windings
· Insulation class B
· Ambient temperature –25 to 40 °C
· Connection terminal (<63 A) · Frequency 50/60 Hz · ±5 % tapping on the primary side

Sample order

· requested type STI0,06
· requested rated input voltage 230 V
· requested rated output voltage 12 V

The correct type designation reads STI0,06(230/12)

The umambiguous article number of your configuration will be defined by trafomodern during the offer- and order process. 

Technical notes

Important Note:

  • According to IEC/EN 61 558 transformers with rated output voltages ranging from 12 V to 42 V can be used as safety transformers.
  • UL/CSA only up to 600 V (incl. tapping)
  • CUR according to UL-File XPTQ2. or XPTQ8.E168819 (General Purpose-Component)
  • From STI0,315 (*/12) —> STZ

When ordering, the following information must be added to the type designation:

  • STI0,06(*/*)
  • 1st place holder≙ rated input voltage
  • 2nd place holder≙ rated output voltage

CAD-data

show

Rated output kVA Short time rating kVA Rated input voltage V(selectable) Rated output voltage V(selectable) Type Price per unit EuroCu-no. 1)
0,06 0,13 230 ± 5 % 400 ± 5 % 12/ 24STI0,06(*/*) Price on request0,20
0,1 0,24 415 ± 5 % 440 ± 5 % 42 / 110STI0,1(*/*) 0,25
0,16 0,36 500 ± 5 % 690 ± 5 % 230 STI0,16(*/*) 0,40
0,2 0,44 STI0,2(*/*) 0,65
0,25 0,6 STI0,25(*/*) 0,80
0,315 0,75 STI0,315(*/* ) 1,10
0,4 1 STI0,4(*/*) 1,15
0,5 1,6 STI0,5(*/*) 1,40
0,63 1,7 STI0,63(*/*) 1,90
0,8 2 STI0,8(*/*) 2,10
1 2,8 STI1,0(*/*) 2,20
1,3 3,7 STI1,3(*/*) 3,20
1,6 5,5 STI1,6(*/*) 3,40
2 7 STI2,0(*/*) 4,00
2,5 9 STI2,5(*/*) 5,50
3 11,5 STI3,0(*/*) 9,50
4 15 STI4,0(*/*) 10,40

1) The calculation method of the material price surcharge will be explained in Section 2.1 in the general conditions of business.

type total
weight
no-load
losses
short-circuit
losses
short-circuit
voltage
efficiency a b c b c b c b c b c e f ø g b1 c1
kg W W % 12 V 24 V 42 V 110 V 230 V
STI0,06 1,5 6 5 7,8 0,85 85 75 91 75 91 75 91 75 91 75 91 64 47 4,8 x 8 60 76
STI0,1 2 7 8 6,9 0,87 85 89 91 89 91 89 91 89 91 89 91 64 61 4,8 x 8 74 76
STI0,16 2,3 9 12 6,6 0,88 85 97 91 97 91 97 91 97 91 97 91 64 70 4,8 x 8 83 76
STI0,2 3 11 17 6,6 0,88 106 83 112 83 112 83 112 83 112 83 112 80 61 5,8 x 12 80 97
STI0,25 3,8 13 14 5,1 0,9 106 111 124 91 112 91 112 91 112 91 112 80 70 5,8 x 12 89 97
STI0,315 4,3 10 18 5,5 0,92 121 88 119 88 119 88 119 88 119 90 68 5,8 x 12 86 106
STI0,4 5,2 17 18 4,4 0,92 121 100 119 100 119 100 119 100 119 90 80 5,8 x 12 98 106
STI0,5 6,8 15 24 3,9 0,93 121 140 131 120 119 120 119 120 119 90 100 5,8 x 12 118 106
STI0,63 7,7 15 27 4,1 0,94 151 121 157 107 145 107 145 107 145 122 82 7 x 15 104 132
STI0,8 9,6 17 25 3,2 0,95 151 138 157 124 145 124 145 124 145 122 99 7 x 15 121 132
STI1,0 13,4 27 29 2,9 0,95 151 164 157 164 157 150 145 150 145 122 125 7 x 15 147 132
STI1,3 14,9 32 35 3 0,95 175 148 169 148 169 138 157 138 157 135 110 7 x 15 135 152
STI1,6 17,4 21 37 2,4 0,96 195 142 240 149 186 142 174 142 174 150 110 10 x 18 140 166
STI2,0 21,5 27 33 2 0,97 195 154 240 161 186 154 174 154 174 150 122 10 x 18 152 166
STI2,5 21,5 39 43 2,4 0,97 195 154 240 154 240 161 186 154 174 150 122 10 x 18 152 166

1) Values measured at room temperature, dimensions in mm

 

type total
weight
no-load
losses
short-circuit
losses
short-circuit
voltage
efficiency a b c b c b c b c b c e f ø g b1 c1
kg W W % 12 V 12 V 24 V 24 V 42 V 42 V 110 V 110 V 230 V 230 V
STI3,0 26 30 55 2,1 0,97 230 210 250 230 255 185 275 170 255 190 200 11
STI4,0 35 38 88 2,2 0,97 230 235 250 255 255 210 275 200 255 190 200 11

1) Values measured at room temperature, dimensions in mm