DTSP – Three-phase autotransformers

Designed and tested according

· IEC/EN 61558-2-1 / EN 60076-11

Typical applications

· Voltage adjustment

Basic equipment

· Insulation class B / F from 6,3 kVA
· Ambient temperature –25 to 40 °C
· Connection terminal (<=115 A) · Frequency 50/60 Hz · Vector group Yna0 · Maximum load to neutral point: 10% of nominal current

Sample order

· required throughput rating 22 kVA
· required rated input voltage 690 V
· required output voltage 400 V

Notes for selection:

· ST = SN x (1 – Lowervoltage / Highervoltage) = 22 kVA (1 – 400V/690 V) = 9,25 kVA
· ST = type power = power, which is relevant for the size of the transformers
· SN = nominal power = power, which is the relevant figure of the load of the transformers

The type rated power is always smaller than the throughtput rating.

Versions with delta stabilizing winding on request.

The correct type designation reads DTSP10,0(690/400)

The unambiguous article number of your configuration will be defined by trafomodern during the offer- and order process.

Technical notes

Important notes:

For versions with increased climate resistance, the transformer is supplied with a specially insulated finish. The finish allows the transformer to be used in areas of high humidity.

CUR according to EIS 130 or EIS 155 to OBJY2. or OBJY8.E160829 (Systems, Electrical Insulation – Component bzw. Systems, Electrical Insulation Certified for Canada – Component)

When ordering, the following information must be added to the type designation:

DTSP10(*/*)
1^st place holder ≙ rated input voltage
2^nd place holder ≙ rated output voltage

CAD-data

show

primary voltage	200-690V	200-690V	200-690V	200-690V	200-690V
secondary voltage	18,5V	24V	42V	110V	200-400V
DT0,1	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,16	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,25	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,4	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,5	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,63	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT0,8	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT1,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT1,3	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT1,6	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT2,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT2,5	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT3,2	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT4,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT5,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT6,3	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP

primary voltage	230V	230V	230V	230V	230V
secondary voltage	18,5V	24V	42V	110V	230V
DT8,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT10,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP

primary voltage	400-690V	400-690V	400-690V	400-690V	400-690V
secondary voltage	18,5V	24V	42V	110V	230V
DT8,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP
DT10,0	SAT / STP	SAT / STP	SAT / STP	SAT / STP	SAT / STP

Type rating for use according to insulation class 1) BkVA	Type rating for use according to insulation class 1) F kVA	Rated input voltage V (selectable)	Rated output voltage V (selectable)	Type	Price per unit Euro	Price for currents up to A	Cu-factor 2)
0,1		50-1000	12-1000	DTSP0,1(/)	Price on request	Price on request	0,45
0,16		50-1000	12-1000	DTSP0,16(/)			0,77
0,25		50-1000	12-1000	DTSP0,25(/)			1,00
0,4		50-1000	12-1000	DTSP0,4(/)			1,60
0,5		50-1000	12-1000	DTSP0,5(/)			1,85
0,63		50-1000	12-1000	DTSP0,63(/)			2,60
0,8		50-1000	12-1000	DTSP0,8(/)			2,60
1		50-1000	12-1000	DTSP1,0(/)			3,50
1,3		50-1000	24-1000	DTSP1,3(/)			4,00
1,6		50-1000	24-1000	DTSP1,6(/)			5,00
2		50-1000	24-1000	DTSP2,0(/)			6,30
2,5		50-1000	24-1000	DTSP2,5(/)			7,00
3,2		50-1000	24-1000	DTSP3,2(/)			10,50
4		50-1000	24-1000	DTSP4,0(/)			11,00
5	5,6	50-1000	24-1000	DTSP5,0(/)			13,00
6,3	7,1	50-1000	24-1000	DTSP6,3(/)			15,00
8	9	50-1000	24-1000	DTSP8,0(/)			16,00
10	11,2	50-1000	24-1000	DTSP10,0(/)			27,00

1) Rated output when used according to insulation class B, maximum of 130° C; for insulation class F maximum of 155° C
2) The calculation method of the material price surcharge will be explained in Section 2.1 in the general conditions of business.

type	total weight	no-load losses	short-circuit losses	short-circuit voltage	efficiency	a	b	b1	c	c1	e	f	ø g
	kg	W	W	%
DTSP 0,1	0,9	5	18	*)	0,81	105	91	66	128	82	80	50	5 x 8
DTSP 0,16	1,9	6	30	*)	0,82	125	86	61	148	102	100	45	5 x 8
DTSP 0,25	2,5	9	35	*)	0,85	125	96	71	148	102	100	55	5 x 8
DTSP 0,4	3,6	11	45	*)	0,88	155	97	77	168	128	130	57	8 x 12
DTSP 0,5	5,1	17	40	*)	0,9	155	112	92	168	128	130	72	8 x 12
DTSP 0,63	6,1	19	50	*)	0,9	190	102	82	194	155	170	58	8 x 12
DTSP 0,8	7,5	25	50	*)	0,91	190	112	92	194	155	170	68	8 x 12
DTSP 1,0	8,9	35	55	*)	0,92	190	122	102	194	155	170	78	8 x 12
DTSP 1,3	11	35	70	*)	0,93	210	122	107	213	174	175	87	8 x 12
DTSP 1,6	12,9	45	70	*)	0,93	210	132	117	213	174	175	97	8 x 12
DTSP 2,0	20,1	55	85	*)	0,93	240	124	107	247	208	185	85	10 x 18
DTSP 2,5	22,4	65	95	*)	0,94	240	134	117	247	208	185	95	10 x 18
DTSP 3,2	27,7	30	135	*)	0,94	300	116	106	296	260	224	78	10 x 18
DTSP 4,0	31	35	130	*)	0,96	300	132	122	296	260	224	94	10 x 18
DTSP 5,0	39,6	75	145	*)	0,97	300	157	147	296	260	224	119	10 x 18
DTSP 6,3	45	80	145	*)	0,97	300	193	162	334	260	224	134	10 x 18
DTSP 8,0	55	50	215	*)	0,97	390	184	152	384	310	350	126	10 x 18
DTSP 10,0	70	55	280	*)	0,97	390	199	167	384	310	350	141	10 x 18

*) depending on the voltage ratio
all dimensions in mm