Isolating transformers according to EN 61558-2-4, double insulated, in a solid portable metal enclosure (metal-clad transformer of protection class II).
Conditionally short-cicuit-proff due to a built-in avercurrent protection device operable from outside.
On the input side the appliance is provided with an exchangeable 1.8 m mains cable, with a tapered from plug (up to TT2.3 as from TT2.8 CEE plugs) plastic cable inlet with pull relief and kink protection; on the output side one socket with hinged lid (schockproof or CEE).
Technical notes
Important note:
The appliances are not qeuipped witha protective conductor connection. For industrial use only.
Technical Data:
- Primary: 230 V 50/60 Hz
- Secondary: 230 V
- Protection: IP 42
- Insulation class: B
- Duty cycle: 100%
- Installion altitude: 1000 m above sea level
- Ambient temperature: 40 °C
- Paint: RAL 7032
- Mains cable: attachment method X
| Rated output kVA | Rated input voltage V | Rated output voltage V | Current A | Type | Price per unit Euro | Cu-factor1) |
|---|---|---|---|---|---|---|
| 0,1 | 230 | 230 | 0.44 | TT 0,1 (230/230) 4001758 | Price on request | 0,32 |
| 0,2 | 230 | 230 | 0.87 | TT 0,2 (230/230) 4001759 | 0,70 | |
| 0,3 | 230 | 230 | 1.3 | TT 0,3 (230/230) 4001760 | 1,00 | |
| 0,5 | 230 | 230 | 2.17 | TT 0,5 (230/230) 4001761 | 1,90 | |
| 0,8 | 230 | 230 | 3.5 | TT 0,8 (230/230) 4001762 | 2,45 | |
| 1 | 230 | 230 | 4.33 | TT 1,0 (230/230) 4001763 | 2,50 | |
| 1,4 | 230 | 230 | 6 | TT 1,4 (230/230) 4033086 | 4,40 | |
| 2 | 230 | 230 | 8,7 | TT 2,0 (230/230) 4001765 | 6,60 | |
| 2,3 | 230 | 230 | 10 | TT 2,3 (230/230) 4001766 | 6,80 | |
| 2,8 | 230 | 230 | 12 | TT 2,8 (230/230) 4001767 | 6,90 | |
| 3 | 230 | 230 | 13 | TT 3,0 (230/230) 4001768 | 7,20 | |
| 3,7 | 230 | 230 | 16 | TT 3,7 (230/230) | 10,20 |
Other voltage combinations on request.
1) The calculation method of the material price surcharge will be explained in Section 2.1 in the general conditions of business.
Scematic diagram
Socket without PE-terminal
| type | total weight |
total losses |
handle | a | b | c |
|---|---|---|---|---|---|---|
| kg | W | |||||
| TT 0,1 | 5,8 | 18 | 1 x top | 139 | 119 | 230 |
| TT 0,2 | 7,0 | 24 | 1 x top | 139 | 119 | 230 |
| TT 0,3 | 8,1 | 28 | 1 x top | 139 | 119 | 230 |
| TT 0,5 | 12,2 | 37 | 1 x top | 169 | 144 | 245 |
| TT 0,8 | 19,6 | 35 | 1 x top | 211 | 179 | 320 |
| TT 1,0 | 23,4 | 42 | 1 x top | 211 | 179 | 320 |
| TT 1,4 | 27,4 | 44 | 1 x top | 211 | 179 | 320 |
| TT 2,0 | 34,0 | 51 | 1 x top | 211 | 179 | 320 |
| TT 2,3 | 36,3 | 86 | 2 x side | 270 | 308 | 314 |
| TT 2,8 | 42,3 | 91 | 2 x side | 270 | 308 | 314 |
| TT 3,0 | 43,8 | 98 | 2 x side | 270 | 308 | 314 |
| TT 3,7 | 46,5 | 101 | 2 x side | 270 | 308 | 314 |
Measurements in mm